20
8.0 VIDEO SETTINGS
8.1 VIDEO MODE
When you turn on the ZX-10, it will automatically default to video
mode. You can identify this mode through the icon on the top left
corner on the screen (there will be a video camera icon in video
mode).
Once you are in the correct mode, to begin recording press the
shoot/record button. The red LED light on the top of the unit will start
flashing when recording. You will also see a flashing red dot on the
screen next to the video camera icon.
To stop recording, press the shoot/trigger icon again.
The ZX-10 comes with a fixed resolution of 1080P Full High Definition.
8.2 PLAYBACK MODE
Playback mode will enable you
to view photos and videos you have
shot with the ZX-10.
To open Playback mode, press the shoot/record button to end
recording if you are in video mode and recording, then press the ON/
OFF button. You will see the Playback icon in the top left corner of the
screen when you are in this mode.
To Next Page
Loading...
