11
6.0 ZX-10 CONTROLS AND FUNCTIONS
6.1 POWER ON/OFF BUTTON
The ON/OFF button is located at the front of the ZX-10 in the top left
corner. This is used to power the unit ON/OFF.
The ON/OFF button is also used to switch between the camera modes
and also serves as the back button, when you are in the navigation
settings.
6.2 SHOOT/RECORD BUTTON
The shoot/record button is located on the top, right hand side of the
ZX-10. This button is used to shoot images and also record videos
(start and stop videos).
The shoot/record button is also used to access the navigation settings
menus, select menu items, and confirm your selection.
6.3 ACCESSING SYSTEM SETTINGS
You can access system settings when using any of the camera modes.
If you are currently in video mode and recording, you will need to
press the shoot/record button to end the recording first. To access
system settings for the ZX-10 follow the below steps:
1. Press the shoot/record button to end recording if you are in video
mode and recording.
To Next Page
Loading...
Need help?
General
