24
1. Ensure you are in video mode.
2. Press and hold the shoot/record on the top of the unit. This will
bring up the navigation menu.
3. Press the down button three times. You will see the ‘date stamp’ tab
highlight.
4. Press the shoot/record button to open the date stamp menu.
5. You can now press the up or down again to move between options.
Once a desired capture mode is chosen, press the shoot/record
button to change.
6. To exit the navigation menu, press the ON/OFF button.
9.0
RESTORE DEFAULT SETTINGS
Selecting this setting will restore the ZX-10 to factory default. Any
adjustments to the unit’s settings will now be erased.
To restore to factory settings, follow the below steps:
1. Press and hold the shoot/record button on the top of the unit. This
will bring up the navigation menu.
2. Quick press the shoot/record button again once in the navigation
menu to navigate to the settings menu.
3. Press the down button six times to navigate down the menu to
‘Restore Default Setting’. You will see this option highlight.
To Next Page
Loading...
Need help?
General
