19
BEGINNERS TIP: A single photo will take only one photo at a time. The self
2S will have a 2 second delay before capturing the image. The self 10S will
have a 10 second delay before capturing the image. (These are great for
selfies or when you have no one else to take a photo for you). Burst mode
takes 3 photos consecutively. Be sure to keep the ZX-10 still when using this
mode.
7.3 DATE STAMP
The date and time is displayed on your images by default. While
the date stamp function is a default feature of the ZX-10, it can be
changed by following these steps:
1. Ensure you are in photo mode.
2. Press and hold the shoot/record button on the top of the unit. This
will bring up the navigation menu.
3. Press the down button three times. You will see the ‘date stamp’ tab
highlight.
4. Press the shoot/record button to open the date stamp menu.
5. You can now press the up or down button again to move between
options. Once a desired capture mode is chosen, press the shoot/
record button to change.
6. To exit the navigation menu, press the ON/OFF button.
To Next Page
Loading...
Need help?
General
