8
BATTERY WARNING
Always charge the ZX-10 using the provided USB Cable. If the ZX-10 is not
charged as directed in this manual, the battery may become damaged and
fail.
• Never dismantle the ZX-10 or expose the internal battery cell.
• Do not dispose of the ZX-10 in fire.
• Please dispose of the ZX-10 mindfully and observe local regulations,
especially in regards to the safe disposal of the internal battery. Check your
local recycling facility for more information.
• Do not attempt to expose the internal battery cell.
• Only use a certified 5V 1A USB charger to charge the ZX-10. Using non-
certified chargers could potentially damage the ZX-10, or the ZX-10 battery
and void the warranty.
• Do not let the battery charge overnight.
• If the ZX-10 appears to still need charging after three hours, temporarily
remove it from its charger as the battery may overheat. Let it cool down for
30 minutes and try charging again.
5.1 CHARGING THE BATTERY
We recommend that you fully charge your ZX-10 before use. A full
charge will take approximately 2.5 hours using a 5V / 1A charger.
To Next Page
Loading...
Need help?
General
