9
The LED light on the back of the ZX-10 indicates the status of the unit’s
charging cycle. It will stay RED while charging. When the ZX-10 is fully
charged the LED light will turn OFF.
5.2 MICRO SD CARD COMPATIBILITY
The ZX-10 requires a Micro SD Card (not included) to save the files it
records. We recommend to use a maximum 32GB, Class 10 or higher
Micro SD Card from a well known brand.
NOTE: There is only one correct way to insert the Micro SD Card into your ZX-
10. It should easily slide in. Do not force the card into the slot as it may
damage the unit and the card.
5.3 POWERING YOUR ZX-10
To power ON your ZX-10 follow the below steps:
1. Insert the battery into the unit.
2. Press and hold the ON/OFF button on the front of the unit, until the
start up screen appears.
5.4 FORMAT YOUR MICRO SD CARD
We recommend that you format your Micro SD card before you
start using the ZX-10. You can do via the ZX-10, by following these
instructions:
To Next Page
Loading...
Need help?
General
