Troubleshooting
6.7
Other Error-Flash Patterns
If the BMS in your power pack produces an error code
which is not described in Understanding BMS Flash Code
Patterns, then the power pack has encountered a serious
internal hardware problem and must be repaired or
replaced by a dealer.
BMS Error Beep Pattern
It is possible to encounter the power ON self-test result
error-beeps from a badly malfunctioning or damaged
power pack. If so, the user should return the power pack to
Zero for repair or replacement.
PATTERN WHEN MEANING
3 Long
Pwr-on
M-cmd
Fail Power ON
self-test Mfg. test
Zero Owner's Manual (X, MX and XU).book Page 7 Monday, April 29, 2013 3:30 PM
To Next Page
Loading...
