Troubleshooting
6.1
TroubleshootingTroubleshooting
Electric Motorcycle Safety Precautions
Your Zero Motorcycle has high voltage components. The
high voltage used by these components is dangerous and
can cause personal injury, severe burns, electric shock
and even fatal injury unless appropriate precautions are
taken.
Always observe and obey the instructions on labels
attached to components on the motorcycle - they are there
for your safety.
Do not touch, attempt to remove or replace any high
voltage parts, wiring (identified by the orange out sleeving)
or connectors. If the motorcycle is involved in an accident
do not touch any high voltage wiring connectors or the
components connected to the wiring. If a fire occurs,
extinguish it with a Class D power-type fire extinguisher.
CAUTION! Your motorcycle uses high voltage. System
components can be hot to touch during and after starting
and when the motorcycle is shut off. Be careful of both the
high voltage and the high temperature.
CAUTION! The motorcycles high voltage system has no
user serviceable parts. Disassembling, removing or
replacing high voltage components, cables or connectors
can cause severe burns or electric shock that may result in
serious injury or death. High voltage cables are colored
orange for easy identification.
Troubleshooting Your Motorcycle
All Zero motorcycles are carefully inspected before they
are delivered. Even after the motorcycles are inspected,
some technical issues can occur. The following information
offers a guide to help you to identify an issue, and if
possible, repair it yourself. If you are unable to solve an
issue with your Zero MX/FX/XU Motorcycle, take it to an
authorized dealer at your convenience. If there is no dealer
in your area call Zero Motorcycles Customer Service.
Zero Owner's Manual (X, MX and XU).book Page 1 Monday, April 29, 2013 3:30 PM
To Next Page
Loading...
Need help?
General
