Troubleshooting
6.11
Charger-Disable Interlock
When the charger is attached and plugged in to AC power,
the BMS communicates with the charger. The BMS can
send a signal to the charger requesting that charging
terminates immediately. When the charger is disabled, the
indicator lights on the charger displays that charging has
stopped.
There are two conditions that cause the BMS to disable
charging:
1. Too hot
The BMS detects an internal power pack temperature
above 131°F (55°C).
2. Too cold
The BMS detects an internal power pack temperature
below 32°F(0°C).
Zero Owner's Manual (X, MX and XU).book Page 11 Monday, April 29, 2013 3:30 PM
To Next Page
Loading...
Need help?
General
