EasyManuals Logo

Zero FX User Manual

Zero FX
126 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #93 background imageLoading...
Page #93 background image
General Maintenance
5.25
12 Volt Fuse Center
The 12 volt fuse center is located behind the front fork
under the left trim panel.
The fuse center has a protective cover that must first be
removed to gain access to the fuses. To remove the cover,
squeeze the tabs (A) together and lift off the cover.
The 12-volt fuse values are listed below:
To access the 12 volt fuse center:
1. Remove the left trim panel by removing 3 hex bolts, 1
standard bolt, and (push-in) plastic rivet.
2. Turn the forks to full lock position.
3. Remove the cover from inside the cavity.
4. Replace the fuse(s).
5. Reinstall the cover.
6. Reinstall the trim panel.
FUSE RATING CIRCUITS CONTROLLED
1 10A Headlight
2 10A Accessory Port
3 10A Flash Lights, Turn Signals, Horn, Brake/Tail Light
4 5A Running Lights
Zero Owner's Manual (X, MX and XU).book Page 25 Monday, April 29, 2013 3:30 PM

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Zero FX and is the answer not in the manual?

Zero FX Specifications

General IconGeneral
CategoryElectric Motorcycle
Max Battery Capacity7.2 kWh
Top Speed85 mph (137 km/h)
Max Power46 hp (34 kW)
Peak Torque78 ft-lb (106 Nm)
BatteryZ-Force Li-Ion
Front SuspensionShowa 41 mm inverted cartridge fork
Rear SuspensionShowa piggyback reservoir shock
Front BrakeSingle 320 mm disc with J-Juan 2-piston caliper
Rear BrakeSingle 240 mm disc with J-Juan 1-piston caliper
MotorZ-ForceĀ® 75-5 passively air-cooled, high efficiency, radial flux, interior permanent magnet, brushless motor

Related product manuals