4
Charging and Battery
Before using the CRANE 2S for the first time, use the charging device provided in the
package to fully charge the batteries so as to activate them and ensure the smooth
use of the product.
Charger and battery description
Charger specifications
Name: 18650 Li-ion battery （three
slots)
Model: CH18650-3B
Input: 5V=2400mA
Output: 4.2V=800mA × 3
● The LED indicator shines solid red
when charging.
● The LED indicators shines solid blue
when fully charged.
Battery specifications
Name: 18650 Li-ion battery
Model: INR 18650-26EC
Capacity: 2600mAh
Voltage: 3.7V
① The stabilizer is equipped with batteries of high energy density, which
may cause fire, economic loss or personal injury when improperly stored
or handled. Please read the disclaimer and warning herein as well as the
description on the battery label carefully before using the batteries.
② Please use batteries provided or approved by ZHIYUN only. ZHIYUN will not
take any responsibility for explosion, fire and/or accidents caused by non-
ZHIYUN batteries.
When the batteries are not in use, please make sure to put them in the battery slot
of the package or in plastic storage cases (the storage case needs to be purchased
separately).
Status indicator lights
To Next Page
Loading...
Need help?
General
