Zhiyun CRANE 2S User Manual

5
Charging and Battery
Charging Procedure
1. Insert the batteries into the charger in the right direction(positive/negative end)
accordingly.
2. Connect the charger to the adapter via the USB Type-C cable.
3. Plug the adapter into a power outlet to start charging.
USB Type-C
cable
Adapter Power supply
① Due to the differences of the charger itself, charging the batteries may fail
when the power supply is insufficient (for instance, when the current of the
adapter is lower than 500mA). Conditions may vary depending on the specific
chargers used. It is recommended to use an adapter with a higher current
capacity.
② The battery cannot be charged through the Type-C port on the stabilizer.
① Please use a qualified standard 5V/ ≥ 2000mA adapter for battery charging;
charging time depends on the maximum input current of the adapter.
② This stabilizer comes standard with three high-discharge-rate ZHIYUN
batteries. Use ZHIYUN batteries only.
③ Please make sure the three batteries are fully charged. Undercharged
batteries can cause stabilizer malfunction.

Zhiyun CRANE 2S Specifications

General

Battery Runtime	12 Hours
Charging Time	4 hours
Wireless	Bluetooth 5.0
APP Control	Yes
USB Charging	Yes
Battery Type	Li-ion
Pan Angle Range	360°
Following Deviation in Static State	±0.01°
Following Deviation in Motion State	±0.05° to ±0.1°
Ports	USB-C
Follow Mode	POV
Compatible Cameras	DSLR, Mirrorless, Cinema Cameras
Material	Aluminum
Operating Voltage	9.8V-12.6V