Zhiyun CRANE 2S User Manual

9
Installation and Balance Adjustment
Balance adjustment
① The CRANE 2S has three lock switches corresponding to each of the
three motor shafts. You can lock the CRANE 2S in the mounting or storage
position for your convenience. Make sure that the three lock switches are
unlocked when powering on to increase stability. Before balance adjustment,
you can lock the CRANE 2S in the mounting position and release the locks of
each axis in stages to facilitate balance adjustment.
安装锁定姿态 收纳锁定姿态
② Place the camera handle close to the tilt axis motor for optimal stability. Loosen
the quick release base locking latch and push the entire quick release base so
that the camera handle is close to the tilt axis motor before locking the latch.
①
②
Locked stage for
mounting
Locked stage for
storage

Zhiyun CRANE 2S Specifications

General

Battery Runtime	12 Hours
Charging Time	4 hours
Wireless	Bluetooth 5.0
APP Control	Yes
USB Charging	Yes
Battery Type	Li-ion
Pan Angle Range	360°
Following Deviation in Static State	±0.01°
Following Deviation in Motion State	±0.05° to ±0.1°
Ports	USB-C
Follow Mode	POV
Compatible Cameras	DSLR, Mirrorless, Cinema Cameras
Material	Aluminum
Operating Voltage	9.8V-12.6V