Zhiyun CRANE-M2 User Manual

6
Installation
GoPro Camera Installation
1. Put GoPro camera into a GoPro
camera cage (not included in the
package). Follow the steps in “Camera
Installation” to mount GoPro camera
with its camera cage on the stabilizer.
Balance the combo according to the
steps listed in “Balance Adjustment
Method”.
2. The stabilizer is ready for use when it
is well balanced as shown above.
1. Put smartphone into the phone
holder and follow the steps in “Camera
Installation” to mount smartphone with
phone holder on the stabilizer. Balance
the combo according to the steps
listed in “Balance Adjustment Method”
(adjustable range of the phone holder is
59-90mm).
2. The stabilizer is ready for use when it
is well balanced as shown above.
There are two 1/4" threaded holes on the phone holder. Please use the shallower
one for mounting phone holder on CRANE-M2 and use the deeper one for
mounting on the tripod.
Smartphone Installation

Zhiyun CRANE-M2 Specifications

General

Weight	500g
Tilt Angle Range	310°
Roll Angle Range	324°
Pan Angle Range	360°
Following Deviation in Motion State	±0.05°
Compatible Devices	Smartphones, action cameras, compact cameras
Stabilization	3-Axis
Payload	720g
Battery Type	Built-in lithium-ion battery
Mounting Options	1/4\"-20 Mounting Hole
Operating Voltage	12.6 V
Control Interface	buttons
Follow Modes	POV, Vortex
Battery Runtime	7 hours