Zhiyun CRANE-M2 User Manual

11
Menu Option Description
motor
(Motor Torque
Settings)
low Low-torque
medium Medium-torque
high High-torque
wifi
（WIFI Information）
C： Camera Brand
S： WIFI Name
history
（WIFI History）
list 1-5 WIFI History
clear Clear WIFI History
joystick
（Joystick
Settings）
reverse
vertical
off
on
horizontal
off
on
about Firmware Version; Stabilizer Model
Motor Torque Adjustment
The motor torque of the stabilizer needs to be adjusted (3 levels) to adapt the stabilizer
to cameras and lens of different weight for ideal use.
How to adjust:
Motor torque levels that are too high or too low may result in shakiness of the
stabilizer and affect its performance.
Option
Weight
Capacity
Compatible Camera & Lens Examples
low Low GoPro Camera
medium
（Default）
Medium Sony DSC-RX100 Series or Smartphone
high High Sony ILCE-6000 + E PZ 16-50mm F3.5-5.6 OSS
motor
wifi
history
low
medium
high
1. Single press the Menu Button and push the joystick to select
"motor", then push the joystick right to enter motor torque
settings.
2. Push the joystick to select appropriate motor torque level and
push right to confirm and apply.
How to Use

Zhiyun CRANE-M2 Specifications

General

Weight	500g
Tilt Angle Range	310°
Roll Angle Range	324°
Pan Angle Range	360°
Following Deviation in Motion State	±0.05°
Compatible Devices	Smartphones, action cameras, compact cameras
Stabilization	3-Axis
Payload	720g
Battery Type	Built-in lithium-ion battery
Mounting Options	1/4\"-20 Mounting Hole
Operating Voltage	12.6 V
Control Interface	buttons
Follow Modes	POV, Vortex
Battery Runtime	7 hours