Zhiyun CRANE-M2 User Manual

20
Calibration and Firmware Upgrade
Six-Side Calibration
1.Six-side calibration via ZY Play：
Please connect the stabilizer and ZY Play following the steps listed in “APP Operations”.
Enter “Calibration” and complete calibration according to the prompts given by the app.
2.Perform six-side calibration by using Zhiyun Gimbal Tools :
Turn on the stabilizer and long press the Mode Button to enter into Standby Mode.
Connect the USB port on the stabilizer and the computer with a USB Type-C cable.
Open calibration upgrade tool and click “Open” to “Calibration”. Proceed the calibration
following the instructions. After the calibration is finished a tick “ √ ” will appear on the
screen.
① Please refer to the following pictures for six-side calibration.
② In simple terms, six-side calibration is to place all six sides of the quick release
plate in vertical to a level surface respectively.

Zhiyun CRANE-M2 Specifications

General

Weight	500g
Tilt Angle Range	310°
Roll Angle Range	324°
Pan Angle Range	360°
Following Deviation in Motion State	±0.05°
Compatible Devices	Smartphones, action cameras, compact cameras
Stabilization	3-Axis
Payload	720g
Battery Type	Built-in lithium-ion battery
Mounting Options	1/4\"-20 Mounting Hole
Operating Voltage	12.6 V
Control Interface	buttons
Follow Modes	POV, Vortex
Battery Runtime	7 hours