Zhiyun CRANE-M2 User Manual

22
Firmware Upgrade
Connect the USB port on the stabilizer and the computer with a USB Type-C cable.
1. Enter the official website of ZHIYUN (https://www.zhiyun-tech.com/en), enter
corresponding product page and click [download]. Download ZHIYUN USB Driver
and the latest firmware (no need to download USB Driver for Mac OS, WIN10
systems).
2. Connect the stabilizer and your computer with a USB cable and install the USB
Driver.
3. Turn on the stabilizer and long press the Mode Button to enter Standby mode.
4. Open “Zhiyun Gimbal Tools” and update firmware according to the instructions.
USB
Motor Fine-Tuning
Please connect the stabilizer and ZY Play following the steps listed in APP Operations.
Enter “Fine tune” in “Stabilizer settings” and adjust the value of the tilt and roll axis angle
to your actual needs.
Calibration and Firmware Upgrade
STEP 6

Zhiyun CRANE-M2 Specifications

General

Weight	500g
Tilt Angle Range	310°
Roll Angle Range	324°
Pan Angle Range	360°
Following Deviation in Motion State	±0.05°
Compatible Devices	Smartphones, action cameras, compact cameras
Stabilization	3-Axis
Payload	720g
Battery Type	Built-in lithium-ion battery
Mounting Options	1/4\"-20 Mounting Hole
Operating Voltage	12.6 V
Control Interface	buttons
Follow Modes	POV, Vortex
Battery Runtime	7 hours