ZKTeco K40 User Manual

K Series Economic Models User Manual
7
3. User Management
3.1. Add a User
Through this menu, you can add a new user to the device, including the user ID, Name, Fingerprint, Password, Card,
VerType, Department and Purview.
3.1.1 Enter a User ID and Name
The device automatically allocates an ID starting from 1 for every user in sequence. If you use the ID allocated by the
terminal, you may skip this section.
SSR Type
No-SSR Type
Press and hold the [M/OK] key on the
initial interface to enter the Main Menu
interface.
Press◄/►key to select User menu
and press [M/OK] to enter the User
interface.
Press◄/►key to select Add User
menu and press [M/OK] to enter the
Add User interface directly.
interface.
Press ▼key to select Add user and
press [M/OK] to enter the Add user
interface.

ZKTeco K40 Specifications

General

Sensor Type	Optical
Resolution	500 DPI
Communication	TCP/IP, USB
Display	TFT LCD Color Screen
Operating Temperature	0°C to 45°C
Communication Interface	TCP/IP, USB
Operating System Compatibility	Windows, Linux
Humidity	20% to 80%
Fingerprint Sensor	ZK Optical Sensor
Algorithm Version	ZKFinger VX10.0