K Series Economic Models User Manual
39
10 System Information
You can check the storage status as well as version information of the K Series attendance machines through the
Sys.Info. menu item.
On the initial interface, press and hold [M/OK] key to enter the Main Menu interface as following figure 1:
Press ◄/► key to select Sys.
Info. menu and press [M/OK] to
enter the Sys. Info. interface.
Free Space shows as above.
Press ►to shows the Device
Information.
Press ◄/► key to select Sys.
Info. menu and press [M/OK] to
enter the Sys. Info. interface.
Free Space shows as above.
Press ►to shows the Device
Information.
Free Space: The number of enrolled users, administrators and passwords is displayed on the Free Space interface. The
total fingerprint storage capacity and occupied capacity as well as the total attendance storage capacity and occupied
capacity are graphically displayed respectively, as shown above figure 2.
Device: The equipment name, serial number, mac address, version information, vendor and date of manufacture are
displayed on the Device interface, as shown above figure 3.
Note: The figure above is for reference only. Please refer to the actual device.
To Next Page
Loading...
