8
View records on the software
1. Connect the device to the network.
2. Login to the ZKAccess3.5 software.
3. Add the device on the software. Download the device records. Then you can click
[Report] to view the records.
Note: For specific operation of ZKAccess3.5 software, please refer to ZKAccess3.5
Security System User Manual.
Ethernet Settings
Press M/OK to enter the main menu and select [COMM.] > [Ethernet] to set the
network parameters. If the TCP/IP communication of the device is successful, the
icon will be displayed in the upper right corner of the standby interface.
Access Control Settings
Press M/OK to enter the main menu and select enter the access [Access Control] to
control management interface and set relevant parameters of access control.
To Next Page
Loading...
