21
Configure the parameters on the device
3.
Click on > [COMM.] > [Cloud Server Setting] to set the server address and
server port, that is, the IP address and port number of the server after the
software is installed. The icon is displayed in the upper right corner of the
standby interface when the device communicates with the server successfully.
a.
Server Port: It is the service port set during installation (not the ADMS port).
Click on > [System] > [Video intercom parameters] > [Intercom Server
Setting] to set the server address and server port.
Server Address: Enter the ZKBioAccess IVS installation IP address.
b.
8098
192.168.163.61
Server Address
Server port
Intercom Server Setting
Main Menu
User Mgt.
User Role
COMM.
System
Data Mgt.Personalize Attendance
Search
Autotest
System Info
Access Control
L
ADMS
8088
192.168.163.61
Server mode
Enable Domain Name
Server Address
Server port
Enable Proxy Server
Cloud Server Setting
To Next Page
Loading...
