ZKTeco SpeedFace-V5L Series Quick Start Guide

Forehead Temperature Detection
Installation height: 1.55m
FOV (Field Of View) of the thermal
imaging device: 50°
Temperature detection distance:
0.3m to 1.2m
Height of the face adapted for
detection: 1.2m to 2m
150CM
Specification
Standard value Remark
Operating
Environment
Distance
(between face
and device)
Measurement
Accuracy
Indoor, Avoid wind, Avoid
direct sunlight,
16°C to 35°C (60.8°F to 95°F)
30 to 120cm (0.98ft to 3.94ft)
±0.3°C (±0.54°F)
The recommended operating
temperature is 25°C (77°F)
The recommended distance
is 80cm (2.62ft)
This value is tested at a distance
of 80cm or 2.63ft under 25°C
(77°F) environment.
Note: The temperature measurement data is only for reference, and not for any
medical purposes.
Installation Requirements
The installation requirements and indications associated with the device are given
below:
Indoor constant Temperature
Environment
4

ZKTeco SpeedFace-V5L Series Specifications

General

Face Capacity	50, 000
Card Capacity	50, 000
Display	5-inch Touch Screen
Operating System	Linux
Certifications	CE, FCC
Communication	TCP/IP, Wi-Fi
Power Supply	DC 12V/3A
Operating Temperature	-10°C to 45°C
Operating Humidity	20% to 80%
Standard Functions	Anti-Passback, Tamper Alarm
Access Control Interface	Exit Button, Door Sensor
Face Recognition Speed	< 1s
Face Recognition Distance	0.3m-2m
Processor	1GHz Dual-Core CPU
Camera	2MP Binocular Camera