Zojirushi NS-TSC10 - How to Set the Clock; Sound Signals and How to Change Them; How to Change the Sound Signal

HOW TO SET THE CLOCK/ SOUND SIGNALS AND HOW TO CHANGE THEM
HOW TO SET THE CLOCK
The clock is displayed in 24 hours (military time) . Although the clock is set before shipment from the factory , certain conditions
such as room temperature may cause it to display an inaccurate time .
If the clock is inaccurate, set the correct time as shown below.
•If the clock is inaccurate, cooking will not be completed at the time you set for the Timer .
•The
clock cannot be changed during Cooking, Reheating , Regular Keep Warm, Extended Keep Warm or Timer Cooking .
e.g.: If the current time is 15:01 but displays 14:56.
1 Set the Inner Cooking Pan and plug in the Power Cord.
2 Press the Time Setting G) or @ button to initiate
the Time Setting and adjust the clock to the current time.
The time display will start to blink .
@ button: Each press advances the time in 1-minute increments.
G) button: Each press moves the clock in reverse by 1 minute.
• Press and hold either button to quickly adjust in 10-minute increments .
3 The time display will stop blinking after 3 seconds,
indicating the Time Setting is completed.
:
0TIME
0SETTING
Time correction is completed
◄ u-•11 I 0
I ) • IJ I
0
':J..
If the time display still does not show the current time, repeat Step 2 to readjust the time .
SOUND SIGNALS AND HOW TO CHANGE THEM
This product is equipped with a Sound Signal function, which will inform you when the Rice Cooker begins cooking, when the
Timer is set , or when cooking has completed . You can choose the Sound Signals from the following:
Types of Sound Signals:
Melody:
Beep:
Silent:
The default setting at the time
of shipment from the factory .
Choose this setting to
change from a Melody.
Choose this setting to
disable the Sound Signal.
Cooking has Begun :
"Twinkle , Twinkle, Little Star"
a beep
Timer is Set:
"Twinkle , Twinkle, Little Star"
a beep
Cooking / Reheating has Completed :
"Amaryllis"
beeps 5 times no sound
HOW TO CHANGE THE SOUND SIGNAL:
1 Set the Inner Cooking Pan and plug in the Power Cord.
2
Hold the
8
onMER button for more than 3 seconds.
3 The setting is completed when the desired Sound Signal is heard.
•You cannot change the Melody Signal of
the initiation of Reheating .
•You
cannot change the Sound Signal
during Cooking , Keep Warm or
Timer Cooking .
•If you find it difficult to change/select the
Sound Signal , please start over from Step 1.
WHEN CHANGING THE SOUND SIGNAL:
• Each time the TIMER button is held for more than 3 seconds, the Sound Signal will change.
------------
G) Melody:
It will play " Amaryllis "
when the sound setting is
completed .
-
® Beep:
It will beep 3 times when
the sound setting is
completed.
--- .. -►
@Silent:
It will beep 1 time when
the sound setting is
completed.
~-------~
t
•
• The selected Sound Signal is stored and will remain even if the Rice Cooker is unplugged.
7