ZOOM A2
12
Set the A2 to play mode
(or manual mode)
If the Module selector is set to a position
other than "PLAY", set it to "PLAY".
Start the rhythm function
Select a rhythm pattern
To start the rhythm function, press the
RHYTHM [R/P] key.
To continuously switch rhythm patterns,
turn parameter knob 1.
To select the next higher or next lower
rhythm pattern, press one of the BANK
[-]/[+] keys.
NOTE
While the rhythm is playing, the
DELAY/REVERB module is set to off.
The A2 has 40 built-in rhythm patterns. For more
information on the pattern contents, see the back
cover of this manual.
When the above steps are carried out, the current
rhythm pattern number (01 – 40) is briefly shown
on the display.
HINT
The rhythm function can be used both in
play mode and manual mode.
Using the Rhythm Function
The A2 has a built-in rhythm function that plays realistic drum sounds in various patterns. The rhythm
function is available in play mode or in the bypass/mute condition.
eA2.fm 12 ページ ２００５年１０月１４日 金曜日 午後５時２９分
To Next Page
Loading...
Need help?
General
