Zoom B3 - Battery and Audio Settings; Battery Type and Audio Settings

20
Changing Various Settings
Changing Various Settings
• TurnofthemiddleeffecttosetthebatterytypetoALKALINEorNi-MH
(nickel-metal hydride).
• Turnoftherighteffect.
8
To adjust the recording level
6
To select the battery type
• Turnoftherighteffect.
NOTE
• Thisadjuststhelevelofthesignalsenttothecomputer.
• Thesettingrangeis±6dB.
NOTE
• Thisadjuststhebalancebetweenthesignalssentfromaconnected
computer (DAW) and the signal input and processed through the
unit (DIRECT).
• Thesettingrangeis0-100.
• Setto0tomonitoronlytheDIRECTsignalor100tomonitoronlythe
DAW signal.
NOTE
• Setthebatterytypecorrectlyinordertoallowtheremainingbattery
charge to be shown accurately.
7
To adjust the USB audio monitoring balance
: Operating on batteries
: Operating on adapter power
: Operating on USB bus power