Zoom MS-70CDR+ - Page 20

20 21
ARENA
REVERB
This reverb effect simulates the acoustics of a large enclosure such as a sports arena.
PRE DLY Adjusts the delay between input of the original sound and start of the reverb sound. 1 - 100
DECAY Sets the duration of the reverberations. 1 - 30
TONE Adjusts the tone. 0 - 10
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
VOL Adjusts the volume. 0 - 100
TAIL
When ON, effect sound continues even after effect is turned off. When OFF, effect sound stops
right when effect is turned off.
OFF, ON
AMBIENCE
REVERB
This effect adds a natural ambience (air) to the sound.
PRE DLY Adjusts the delay between input of the original sound and start of the reverb sound. 0 - 200
DECAY Sets the duration of the reverberations. 0 - 100
TONE Adjusts the tone. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
DRY
When ON, the original sound and the effect sound are mixed and output together. When OFF,
only the effect sound is output.
OFF, ON
TAIL
When ON, effect sound continues even after effect is turned off. The dry sound also continues
to have the same tone as when the effect was on. When OFF, effect sound stops right when
effect is turned off.
OFF, ON
CHAMBER
REVERB
This effect simulates the reverberations of a chamber-sized room.
PRE DLY Adjusts the delay between input of the original sound and start of the reverb sound. 0 - 200
DECAY Sets the duration of the reverberations. 0 - 100
TONE Adjusts the tone. 0 - 100
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
TAIL
When ON, effect sound continues even after effect is turned off. When OFF, effect sound stops
right when effect is turned off.
OFF, ON
AIR REVERB This effect reproduces the ambience of a room, to create spatial depth.
SIZE Sets the size of the space. 1 - 100
REFLECT Adjusts the amount of reflection from the wall. 0 - 10
TONE Adjusts the tone. 0 - 10
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
VOL Adjusts the volume. 0 - 100
TAIL
When ON, effect sound continues even after effect is turned off. When OFF, effect sound stops
right when effect is turned off.
OFF, ON
EARLY
REFLECTION
REVERB
This effect reproduces only the early reflections of reverb.
DECAY Adjusts the duration of the reverb. 1 - 30
SHAPE Adjusts the effect envelope. -10 - 10
TONE Adjusts the tone. 0 - 10
MIX Adjusts the amount of effected sound that is mixed with the original sound. 0 - 100
VOL Adjusts the volume. 0 - 100
TAIL
When ON, effect sound continues even after effect is turned off. When OFF, effect sound stops
right when effect is turned off.
OFF, ON
REVERB