12
Intel G31 Motherboard
Connecting Cables and Setting Switches
This section takes you through all the connections and switch settings necessary on
the motherboard. This will include:
q Power Connections
v 24-pin ATX power (PW1)
v 4-pin ATX 12V power (PW2)
q Connecting Internal Headers
v Hard Disk Connector - IDE
v SPK Header
v Serial Port Header - COM
v Front panel header
v USB Headers
v Floppy Disk Drive Connector - FDD
v F_Audio Header
v SPDIF-Out Header(Optional)
q Serial ATA II
q Chassis Fans
q Expansion slots
q Jumper settings
See Figure 1 to locate the connectors and jumpers referenced in the following
procedure.
To Next Page
Loading...
