20
Intel G31 Motherboard
JP1 Selection
1-2* Normal*
2-3 CMOS Clear
Jumper Setting
This chapter explains how to congure the motherboard’s hardware. Before using your
computer, make sure all jumpers and DRAM modules are set correctly. Refer to this
chapter whenever in doubt.
Notice:
1. Be sure to save the CMOS setting when exit the CMOS.
2. If the CPU is frequency multiplier locked, no CPU speed change will be
seen even if the frequency multiplier setting in CMOS setup is changed.
If you want to clear the system conguration, use the JP1 (Clear CMOS Jumper) to clear data.
JP1-CMOS Clear
Close Open * = Default setting.
1
1
To Next Page
Loading...
