Zotac G31 series

29
Conguring the BIOS
This option allows you to select the power-on state of NumLock. Select On
to activate the keyboard NumLock when the system is started. Select Off to
disable the NumLock key.
q Gate A20 Option
Use this option to choose Gate A20 menu.
q Typematic Rate Setting
Use this option to set keystrokes repeat. if Enabled, display options as follows:
v Typematic Rate
v Typematic delay
q Security Option
The Security Options allows you to require a password every time the system
boots or only when you enter setup. Select Setup to require a password to gain
access to the CMOS Setup screen. Select System to require a password to
access the CMOS Setup screen and when the system boots.
q APIC Mode
Use this function to enable or disable the Advanced Programmable Interrupt
Controller (APIC). If you disable this option, you also disable the MPS Version
Control for OS option.
q MPS Version Control For OS
Use this function to select the Multi-Processor Specication (MPS) version that
BIOS passes to the operating system. Use the Page Up and Page Down
keys to scroll through the options.
q Full Screen LOGO Show
This option allows you to enable or disable the display of the full-screen logo
when the system boots. Use the Page Up and Page Down keys to toggle
between Enable and Disable.
q Small LoGo (EPA) Show
This option allows you to enable or disable the display of the Small LoGo when
the system boots.