33
Conguring the BIOS
q Suspend Type
Use this option to choose suspend type
q MODEM Use IRQ
Use this option to set the mode of using IRQ
q Suspend Mode
Use this option to set suspend mode
q HDD Power Down
Use this option to enable or disable a mode of HDD Power down.
q Soft-Off by PWR-BTTN
This function on the Power Management Setup menu allows you to set Soft-Off
by PWR-BTTN to [Instant-Off] or [Delay 4 Sec].
q Wake-Up By PCI card
Use this option to enable or disable wake-up by PCI card
q Power On by Ring
Use this option to enable or disable power on by ring
q USB KB Wake-Up From S3
Use this option to enable or disable USB KB Wake-up from S3
q Resume by Alarm
Determines whether to power on the system at a desired time. If enable set the
date and time as following:
v Date(of Month) Alarm: Tarn on the system at a specic time on each day or
on a specic day in a month.
v Time(hh:mm:ss) Alarm: Set the time at which the system will be Powered
on automatically.
q HPET Support
Use this option to enable or disable HPET Support; if enable, HPET Mode
display. We can select.
q HPET Mode
Use this option to set HPET mode