Zte Blade Force - Using Wi-Fi Direct

51
u
Passpoint:
Enable or disable your phone to
automatically connect to a passpoint-certied Wi-Fi
access point.
Using Wi-Fi Direct
®
Wi-Fi Direct allows Wi-Fi devices to share les and data directly
by connecting to each other without the need for wireless
access points (hotspots).
To connect via Wi-Fi Direct:
1. Touch the
Home
key
> > Settings > Wi-Fi
.
2. If Wi-Fi is off, slide the
Wi-Fi
switch to the
On
position.
3. Touch
> Advanced > Wi-Fi Direct
. Your phone will search
for other devices enabled with Wi-Fi Direct connections.
4. Touch a device name below
Peer devices
and select
Connect
to connect with it.
The other device will receive a connection prompt and need
to accept the request for connection. Both devices may
need to enter a common PIN.
5. Once connected the device is displayed as “Connected” in
the
Peer devices
list.