Zte MC8010CA - Managing Main SSID Settings

25
NOTE:
Guest SSID and Internet Wi-Fi are two mutually exclusive features. Disable
one if you want to use the other.
Managing Main SSID Settings
You can configure the basic settings for the Smart Hub Wi-Fi on the 2.4
GHz and the 5 GHz bands. Click Apply to save the settings.
• Network name (SSID): Set the Service Set Identifier (SSID) for the 2.4
GHz bands or the 5 GHz bands.
• Broadcast network name (SSID): Only when you check this option can
new Wi-Fi clients find the network. If you want new clients to connect,
you must enter the SSID and password manually.
• Isolate all wireless devices: When you check this option, clients
connected to the Wi-Fi network cannot discover and communicate with
each other via the network.
• Security mode: Set the security mode for authentication and
encryption.
Mode Description
OPEN
Authentication and encryption won’t be performed.
There are risks that private information will be
intercepted or unauthorized individuals will use the
network.
WPA2(AES)-
PSK
A more secure version of WPA with implementation
of the 802.11i standard.
WPA-PSK/
WPA2-PSK
Apply both the WPA-PSK and WPA2-PSK schemes.
• Password: Set the Wi-Fi password when the security mode is not
OPEN.
NOTE:
Check the Show password box to view the password.
• Sync basic settings to 5 GHz: Sync the basic settings for 2.4 GHz Wi-