Zte MC889 - Installation Precautions

37
Prepare the following accessories (not included):
y
Crosshead screwdriver
y
Flat head screwdriver
y
Hammer drill
y
Marker pens
Installation Precautions
y
Do not install the device in the following directions:
Do not install the device
with the interface side
facing upwards.
Do not install the device
horizontally.
Do not install the device
tilted.
WARNING!
ZTE is not liable for any problem caused by device falling due to incorrect
installation, such as property damage, personal injury or death.
WARNING!
The device must be installed downwards and vertically. It is not recommended
to install the device in other directions (including but not limited to the above
scenarios). ZTE is not liable for any problem caused by the installation in other
incorrect directions.
y
Do not install the device at a high position (lightning area).
y
The device must be placed in a well-ventilated environment for use. If possible,
install the device in a place with less direct sunlight, for example, in the shade.
The device must not be installed at the outlet of the exhaust pipe, or installed
in a place where water passes through, for example, a rain shed.