EasyManua.ls Logo

Zte MF29 - Page 15

Zte MF29
25 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28 29
Wi-Fi On/Off: Enable Wi-Fi or not.
Network Mode: If all of the wireless devices connect with this
router in the same transmission mode, performance will be
improved by choosing the appropriate wireless mode.
Network Name(SSID): Service Set Identifier (SSID). Enter a
string less than 32 characters as the name for your wireless local
area network (WLAN).
Broadcast Network Name(SSID): Disable or Enable (Default)
this function. If Enable is selected, the router broadcasts the
SSID, and other devices can detect and connect to it.
AP Isolation: When Enabled is selected, each of your wireless
clients will not be able to communicate with each other.
BSSID: MAC address of the Wi-Fi.
Frequency(Channel): Choose the appropriate channel to
optimize the performance and coverage of your wireless
network.
WDS Mode: WDS enable router to communicate with other APs,
WDS connection is two-way communication, APs should know
each other’s wireless MAC address. And make sure that all APs
share the same SSID and channel.
WDS conguration is shown below:
Step Description
1. Set the same SSID
and channel for APs
Manually set the SSID and channel is
strongly recommended.
2.Select WDS mode:
Disable, Lazy Mode,
Bridge Mode or Re-
peater Mode
If you select Disable, WDS is disabled.
If you select Lazy Mode, WDS is en-
abled, and set wireless MAC address
only on the peer APs.
If you select Bridge Mode, WDS is en-
abled, and set the peer APs wireless
MAC address on router. When you set
Bridge Mode, your PC can not search
SSID of AP after connected.
If you select Repeater Mode, WDS is
enabled, and set the peer APs wireless
MAC address on router. When you set
Repeater Mode, your PC can search
SSID of AP after connected.
3. Select Phy mode:
CCK,OFDM, HTMIX or
GREENFIELD
CCK: 802.11b
OFDM: 802.11g
HTMIX: 802.11b/g/n Mixed Mode
GREENFIELD: 802.11b/g Mixed Mode
4. Select Encrypt
Type: WEP, TKIP, AES
If you select NONE, all the data transmitted
without encryption, and other station can
access router.
MF29T User Manual V1.1-0703.indd 28-29 2012-7-3 16:46:31

Related product manuals