Zte MF60 - Disconnect from the Internet; Usage of WPS

ZTE MF60 Quick Guide
10 Confidential and Proprietary Information of ZTE CORPORATION
Select Settings > Advanced
View the current status of your device, change
the Administrator Settings, restore factory
defaults, manage PIN or set the LAN interface
configuration.
Notes:
Make sure that you can remember the new password if you change the login password by
selecting Settings > Advanced > Management. Please restore the device to the factory default
settings in case you forget the new password.
Disconnect from the Internet
1.Log in the WebGUI Configuration page, and select WAN Connection.
2.Select Manual > Disconnect Internet.
3.Click Apply.
Notes:
Turning off the device can also terminate the internet connection.
SMS
This function allows you to view, send and receive short messages.
After logging in, select SMS, and you can do the following operations.
Select SMS > Native
Operate the SMS in your device.
Select SMS > SIM Card
Operate the SMS in your SIM card.
Select SMS > New Message
Send or save SMS.
Select SMS > SMS Settings
Set the SMS configuration.
PhoneBook
This function allows you to store contacts to your device or SIM card.
After logging in, select PhoneBook, and you can add a new contact in Add New tab, and
perform operations to the contact in the Native or SIM Card tab.
Usage of WPS
If your client device supports WPS, you need not to input the password manually after WPS has
been available. Please do the following:
1. Start up your device.
2. Launch the client device connected to your device.