Zte MF60 - Switching On;Off Your Device; Charging Your Device

ZTE MF60 Quick Guide
6 Confidential and Proprietary Information of ZTE CORPORATION
Establish a connection between your device and the client
Via USB Cable
Connect your device and the client with the USB cable.
Power on your device.
Follow the system prompts to complete the software installation.
Notes:
•If the system does not launch installation automatically, you can run the installation program in path of
My Computer > Portable Hotspot.
•The driver of your device will be installed at the same time.
 After the installation, the system will create a shortcut icon on your desktop and a ZTE USB Drivers
for MF60 program group in the Start→Programs menu. The connection between your device
and the client will be established successfully a moment later.
Via Wi-Fi
1. Power on your device directly. It will take 1~2 minutes to initialize.
2. Use your normal Wi-Fi application on the client to search the available wireless network.
Notes: You need to check your Wireless Network Connection. Set the client to obtain an IP
address automatically in the Internet protocol (TCP/IP) properties, and the client will get an IP
address like “192.168.0.100”.
3. Select the SSID of your device, and then click Connect.