Zte MF60 - microSD Card Operations; About SIM Card

ZTE MF60 Quick Guide
Confidential and Proprietary Information of ZTE CORPORATION 7
Notes:
There will be a pop-up window to require the password. Check the label on your device to gain the
SSID and preset password information. Please do remember the new password when you change the
password by selecting Settings > Wi-Fi Settings > Security after logging in the WebGUI Configuration
Page. You can restore the device to the factory default settings in case you forget it.
4. Wait a moment, the connection between your device and the client will be established successfully.
Access the Internet
1. Switch on the device.
2. Establish a connection between your device and the client.
3. After successfully establishing the connection, access the Internet in the Always On and
Manual mode. The default mode is Always On.
Notes:
You can browse the WebGUI Configuration page and click WAN Connection to set the WAN
connection mode.
Access the WebGUI Configuration Page
1. Make sure the connection between your device and the client is correct.
2. Launch the internet browser and enter http://192.168.0.1 or http://ufi.home in the address bar.
Notes:
It is recommended that you use IE (6.0 or later), Firefox (2.0 or later), Opera (10.0 or later), Safari (4.0 or
later), Chrome (5.0 or later).
3.The login page appears as follows.