Profile Name: A name that identifies the profile.
APN: Access Point Name. If a fixed APN is provided by your service provider, select
Manual APN. Otherwise select the Auto APN and the router will automatically obtain
this parameter.
Dial Number: This dial number is used for data service connection.
User: User name is used to obtain authentication from the ISP when the connection is
established. User name provided by your ISP.
Password: The password of your 3G account.
DNS Type: If a fixed IP address is given by your service provider, then choose
Manual DNS. Otherwise, choose Auto DNS, and router will automatically obtain
parameters.
Primary DNS Server: The IP address of the Primary Domain Name Server. A DNS
maps numerical IP addresses to domain names and can be used to identify network
hosts by familiar names instead of the IP addresses. To specify a DNS server, type
the IP addresses in the text field provided. Otherwise, leave the text field blank.
Secondary DNS Server: The IP address of the Secondary Domain Name Server.
MAC Clone: Some ISPs limit Internet connections to a specified MAC address. This
setting allows you to manually change the MAC address of the adaptor's WAN
interface to match the PC's MAC address provided to your ISP for registration. You
can enter the registered MAC address manually by typing it in the boxes provided.
Otherwise, connect only the PC with the registered MAC address to the adaptor,
then click the “Clone your PC’s MAC Address” (Default: Disable).
Click Save Settings to confirm your configuration.
Click New to define a new profile, and then click Add to save the new profile. Click Delete to
delete the selected profile.
Notes:
You cannot delete the default profile.
If you want to modify the profiles, please contacts with your service provider for the
parameters.
To Next Page
Loading...
Need help?
General
