Zte Z291DL - POWERING DEVICE ON;OFF; DEVICE CHARGING

POWERING ON/OFF YOUR DEVICE
Slide the Power switch to the ON/OFF position to switch on/off the device.
SLEEP MODE
When you enable the Wi-Fi function and use the battery to supply power to a
device, the hotspot will enter sleep mode when there are no users connected
to the hotspot after a specified time. In sleep mode, the Wi-Fi function will be
disabled. Press the WPS key or plug in the USB cable to wake up the device
and resume Wi-Fi function.
CHARGING YOUR DEVICE
You can charge your device by using the USB cable or adapter. Please charge
your device for more than two hours when you use it for the first time or when
you haven’t used it for a long time.
• UsetheUSBcabletoconnectyourdevicedirectlytoaPC.
GETTING STARTED
9