CTIA REQUIREMENTS
• Donotdisassembleoropen,crush,bendordeform,puncture,orshredthe
battery.
• Donotmodifyorremanufacture,attempttoinsertforeignobjectsinto
the battery, immerse or expose to water or other liquids, expose to fire,
explosion or other hazard.
• Onlyusethebatteryforthesystemforwhichitisspecified.
• Onlyusethebatterywithachargingsystemthathasbeenqualified
with the system per CTIA Certification Requirements for Battery System
Compliance to IEEE 1725. Use of an unqualified battery or charger may
present a risk of fire, explosion, leakage, or other hazard.
• Donotshortcircuitabatteryorallowmetallicconductiveobjectstocontact
battery terminals.
• Replacethebatteryonlywithanotherbatterythathasbeenqualified
with the system per this standard, IEEE-Std-1725. Use of an unqualified
battery may present a risk of fire, explosion, leakage or other hazard. Only
authorized service providers shall replace the battery. (If the battery is non-
user replaceable).
FOR YOUR SAFETY
44