ZXHN H1600 Maintenance Management Guide
Figure 2-3 The Side Panel
Table 2-4 describes the interfaces and buttons on the side panel of the ZXHN H1600.
Table 2-4 Descriptions of the Side Panel
Interface/Button Function
DSL
RJ-11 port. It is used to connect to the ADSL, VDSL or VDSL uplink ac-
cess network.
WAN RJ-45 port. It is used to connect to the uplink Ethernet access network.
LAN1\LAN2\
LAN3\LAN4
RJ-45 port. It is used to connect the modem to computer, STBs or other
network devices.
2-8 SJ-20200218145027-006 | 2021-03-04(R1.0)
To Next Page
Loading...
