ZXHN H1600 Maintenance Management Guide
Steps
Configure the DSL Connection
1. On the main page of the ZXHN H1600, select Internet > WAN > DSL to the DSL
Connection page, see Figure 5-7.
Figure 5-7 DSL Connection page
Table 5-1 lists the new item parameters.
Table 5-1 Parameter Descriptions for the DSL
Parameter Description
Connection Name Name of the connection.
DSL Transfer Mode There are two xDSL transfer modes: ATM, PTM.
VPI/VCI
If xDSL Transfer ModeEnter is selected to be ATM, the VPI/VCI
values provided by the ISP needs to be configured.
VPI Range: 0 - 255
5-6 SJ-20200218145027-006 | 2021-03-04(R1.0)
To Next Page
Loading...
