ZXHN H1600 Maintenance Management Guide
1. On the main page of the ZXHN H1600, select Internet > Security > Filter Criteria to
the Filter Criteria page.
2. Click Filter Switch and Mode Configuration to the configuration page, see Figure
5-20.
Figure 5-20 Filter Switch and Mode Configuration Page
3. Configure filter switch and mode configuration parameters, see Table 5-11 .
Table 5-11 Parameter Descriptions for the Filter Switch and Mode Configuration
Parameter Description
URL Filter Set radiobox On to enable the URL filter function.
Mode There are two modes:
Black List: Addresses in the URL Filter list are not allowed to access.
White List: Only addresses in the URL Filter list can be accessed.
4. Click Apply button to apply the changes.
Configure the URL Filter
1. Click URL Filter to open URL Filter page, see Figure 5-21.
Figure 5-21 URL Filter Page
2. Table 5-12 lists the URL filter parameters.
5-24 SJ-20200218145027-006 | 2021-03-04(R1.0)
To Next Page
Loading...
