Zte ZXV10 T700 - Input Method

Chapter1Overview
àThecommonterminalcanonlydisconnecttheconnectionwithanMCUterminal,
thatis,onlythecommonterminalitselfquitstheconference.
lForamultipointconferenceofMCU,theoperationsareasfollows:
àThechairmancanendtheconferenceaheadoftheschedule.
àThecommonterminalcanonlydisconnecttheconnectionwithanMCUterminal,
thatis,onlythecommonterminalitselfquitstheconference.
Theconferencecanbecalledanddisconnectedbytheremotecontrol,Webpage,orPC
console.
Context
Thissectiondescribeshowtodisconnecttheconferencebyusingtheremotecontrol.The
relatedoperationsbyWebpageandPCconsoleareasfollows:
lLogintotheWebpage.SelectCallControl>Call/Disconnect.The
Call/Disconnectpageisdisplayed.ClickDisconnectnexttotheterminaltobe
disconnected.
lLogintothePCconsole.OntheCallControlpage,clickDisconnectnexttothe
terminaltobedisconnected.
Steps
1.Commonterminal:PresstheDisconnectkeyontheremotecontrol.Inthedialogbox
thatisdisplayed,selectOK.
2.TerminalwithembeddedMCU:PresstheDisconnectkey.Inthemenuthatis
displayed,selectDisconnectAllorselecttherequiredterminal.
3.Chairmanterminal:
a.PresstheConfkeyontheremotecontrol.
b.IntheConferenceControlmenu,select8.ConfManagement.
c.IntheConfManagementmenu,select6.EndConference.
d.Intheconrmationdialogbox,selectOK.
–EndofSteps–
1.7InputMethod
SwitchingInputMethod
Inthetextinputmode,continuouslypresstheKEYBkeytoswitchinputmethodbetween
,#?(symbol),ABC(letter)Pin(Chinese),En(English),andNumber.
1-11
SJ-20120112164919-002|2012-05-10(R1.1)ZTEProprietaryandCondential