Zte ZXV10 T700 - Uploading and Setting Custom GUI Logo

Chapter6PersonalizedSettings
2.SelecttheGUItransparencyoftheterminal.Thereareveoptions:0%,25%,50%,
75%and100%.
3.Savethesetting.
–EndofSteps–
6.4UploadingandSettingtheLogooftheGUI
lYoucouldpersonaliseyourcorporatelogointotheZXV10T700GUI.
lBoththeMainGUIandtheWebGUIcanbeeditedtodisplaythecustomlogoinstead
ofdisplayingthedefaultZTElogo.
lOnlythroughtheWebGUIcanyouuploadthelogo.
Prerequisite
Prepareyourlogole“*.png”oflessthan256k.Andtheresolutionis221x39pixels.
Steps
1.SelectSystemSettings>Logo.TheLogopageisdisplayed.
2.ClickGUICong.
3.Uploadalogoimage:
i.ClicktheBrowse...buttonofLogoUpload.
ii.Selectthecorrespondingimagele.
iii.ClicktheUploadbuttontoupload.
IftheUploadbuttonbecomesunavailable,checkiftheimageformatiscorrect.
4.CongurethelogooftheGUI:
i.ClicktheLogoCongdrop-downlist.
ii.SelectCustomorDefault.
TheCustomstyleistheimageyouuploaded.
iii.ClickSettovalidatetheconguration.
–EndofSteps–
Follow-UpAction
YoucanswitchbetweenthecustomlogoordefaultZTElogotusingtheremotecontrol
afterthecustomlogohasbeenuploaded.
SelectManagement>General>Appearance.TheAppearancescreenisdisplayed.
TurnoverthepagetosettheLOGO.
6-3
SJ-20120112164919-002|2012-05-10(R1.1)ZTEProprietaryandCondential