Zte ZXV10 T700 - Table 2-3 Video Output Port Description

Chapter2CommonOperations
Note:
Forexample,toswitchthemainvideooutputtoHDMI,pressthefollowingsixkeys
continuously:Disconnect,*,#,0,1,and0.
Steps
1.SelectSystem>Video>VideoOut.TheVideoOutscreenisdisplayed.
2.Conguretheportaccordingtotherequirement.(Usually,adoptthedefaultsettings.)
a.SelecttheCongbuttononrstorseconddisplay.TheCongscreenis
displayed.
b.RefertothefollowingtabletosettheparametersontheCongscreen.
Table2-3VideoOutputPortDescription
ParameterDescription
PortSelecttheoutputport.Thevideostreamisoutputfromthephysicalport
oftheterminal.
TheHDMIoptionstandsfortheHDMIOUTinterfaceoftheterminal.And
theVGA/ComponentoptionstandsfortheVGAOUTinterfaceofthe
terminal.
WorkModeSelecttheworkingmodeoftheport.
lHDMI:TheoptionisHDMI.
lVGA/Component:TheoptionincludesVGAandComponent.
ResolutionSelecttheoutputresolution.TheAutoisrecommended.
OverScanIfthecurrentvideooutputsystemandtheTVsystemdonotmatch,certain
videoimagescannotbefullydisplayedontheTV.Inthiscase,settheOver
Scanparameters.TheoptionsincludeNone,Medium,andHigh.
IfyousetOverScantoMediumorHigh,thesystemzoomsinthevideo
imagesatacertainpercentageandllsthemarginswithblack.
c.Aftersettingtheparameters,presstheReturnkeyontheremotecontrol.
3.Ifyouneedtooutputtwovideostreamstotwomonitors,theoptioninthesecondrow
mustbeselected.
4.Setthedisplaymodeofthevideooutputs.
a.SelecttheDisplayModebuttonoftherstorsecondrow.TheWithout
Presentationscreenisdisplayed.
OntheWithoutPresentationscreen,setthedisplaymodeoftheconference
withonlyonevideostream,thatis,nosecondaryvideostreamisprovidedinthe
conference.
2-13
SJ-20120112164919-002|2012-05-10(R1.1)ZTEProprietaryandCondential