Zte ZXV10 T700 - Page 57

Chapter5CommonConferenceControlOperations
OperationApplication
ExtendConferenceExtendstheconferenceperiod.
Whenperformingthisoperation,ensurethatthetotalconferenceperioddoes
notexceed72hours.
EndConferenceEndstheconferenceaheadofschedule.
Prerequisite
lOnlywhenmultipointconferencesarelaunchedbyanexternalMCU,thechairman
terminalcanperformalltheoperationsdescribedinthissection.
lWhenmultipointconferencesarelaunchedbyanembeddedMCUterminal,the
chairmancanperformtheRemoveTerminalandEndConferenceoperations.
Steps
1.PresstheConfkeyontheremotecontrol.TheConferenceControlmenuis
displayed.
2.Select8.ConfManagement.TheConferenceControlmenuisdisplayed.
3.Fortherelatedoperations,refertothefollowingtable:
OperationStep
AddaTerminali.Select1.AddTerminal.
ii.Inthedialogboxthatisdisplayed,entertheterminalnumberregistered
intheGKserver,thatis,theterminalnumberdisplayedontheH.323
page.
iii.SelectAdd.
RemoveaTerminal
(Alsoavailablefor
embeddedMCU
conferences)
i.Select4.RemoveTerminal.
ii.Inthedialogboxthatisdisplayed,selecttherequiredconferencesite
name.
iii.Onthedisplayedpop-upmessage,selectOK.
Reconnecta
Terminal
i.Select2.CallTerminal.
ii.Inthedialogboxthatisdisplayed,selecttherequiredterminal.
OntheCallTerminalscreen,thelistedterminalsarethosethatare
notconnectednormally.Ifnoterminalislisted,itindicatesthatall
conferencemembersjoinintheconferencenormally.
Disconnecta
Terminal
i.Select3.DisconnectTerminal.
ii.Inthedialogboxthatisdisplayed,selecttherequiredterminal.
iii.Onthedisplayedpop-upmessage,selectOK.
5-9
SJ-20120112164919-002|2012-05-10(R1.1)ZTEProprietaryandCondential