21
Q Starting with the front filter cartridge,
unscrew it clockwise (CW) and lower it
into the dust container as shown in Fig. 22
and remove it to the front, see Fig. 23.
Q Proceed in the same way until all 3 filter
cartridges are removed.
Q When reinstalling the new filter cartridges,
start with the rear cartridge and grab it
firmly with both hands to distribute the
force required to tighten it.
Q Make sure that the sealing of the filter
cartridge is tight against the top of the
housing.
Q Before reassembling the filter cover (35),
make sure that the surrounding seal is in
good condition.
Q Please clean the cover previously.
Store contaminated filters immediately
after removal in a dust-proof sealable
container (plastic bag) and dispose it in
accordance with your local regulations.
Fig. 22
Fig. 23
3.3 Spare Parts
Best.-Nr.
Filter set (3pcs.) 556/044
Dust container 563/07561
Motor 752/3470
To Next Page
