ZyXEL Communications AMG1202-T10A - The IP;MAC Filter Screen

Chapter 11 Filters
AMG1202-T10A User’s Guide
146
11.4 The IP/MAC Filter Screen
Use this screen to create and apply IP/MAC filters. Click Security > Filter > IP/MAC Filter. The
screen appears as shown.
Figure 76
Security > Filter > IP/MAC Filter
The following table describes the labels in this screen.
Table 52 Access Management > Filter (IP/MAC)
LABEL DESCRIPTION
IP Filter Select
IP Filter Select Select IP White Filter to configure traffic to allow. Select IP Black
Filter to configure traffic to block.
IP/MAC Filter Set Editing
IP/MAC Filter Set Index Select the index number of the filter set.
Interface Select the PVC to which to apply the filter.
Direction Apply the filter to Both, Incoming or Outgoing traffic direction.