EasyManua.ls Logo

ZyXEL Communications AMG1202-T10A - Windows Vista

ZyXEL Communications AMG1202-T10A
296 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Appendix A Setting up Your Computer’s IP Address
AMG1202-T10A User’s Guide
233
If you have previously configured DNS servers, click Advanced and then the DNS tab to order
them.
Figure 122 Windows XP: Internet Protocol (TCP/IP) Properties
8 Click OK to close the Internet Protocol (TCP/IP) Properties window.
9 Click Close (OK in Windows 2000/NT) to close the Local Area Connection Properties window.
10 Close the Network Connections window (Network and Dial-up Connections in Windows
2000/NT).
11 Turn on your ZyXEL Device and restart your computer (if prompted).
Verifying Settings
1 Click Start, All Programs, Accessories and then Command Prompt.
2 In the Command Prompt window, type "ipconfig" and then press [ENTER]. You can also open
Network Connections, right-click a network connection, click Status and then click the Support
tab.
Windows Vista
This section shows screens from Windows Vista Enterprise Version 6.0.

Table of Contents

Other manuals for ZyXEL Communications AMG1202-T10A

Related product manuals